EN - product guides
In this section Product Instructions, you will find step-by-step instructions for item products.
These can be opened as required before or during installation, e.g. on a mobile device at the workbench.
The processing time per module depends on the product and varies.
Do you have any questions, feedback or requests for new interactive instructions? We are looking forward to your e-mail to academy@item24.com!
These can be opened as required before or during installation, e.g. on a mobile device at the workbench.
The processing time per module depends on the product and varies.
Do you have any questions, feedback or requests for new interactive instructions? We are looking forward to your e-mail to academy@item24.com!
Work Bench System
Build a table frame step by step using the table column set 8 80x40 K.
Build a table frame step by step using the table column set D40/D30 K.
Automation System
This module shows the step-by-step assembly of the linear unit KLE 5 40x40 LR.
Step-by-step instructions: Toothed belt disassembly and assembly, setting the toothed belt pre-tension, carriage
Step-by-step instructions: Toothed belt disassembly and assembly, setting the toothed belt pre-tension, carriage slackness,...
Step-by-step instructions: Toothed belt disassembly and assembly, as well as setting the toothed belt pre-tension.
The instructions show the commissioning step by step.
This module shows the step-by-step assembly of the linear guide 6 60 PS.
This module shows the step-by-step assembly of the Profile Fastening Set 6/8 80x60
This module will lead you step by step through the installation process of Controller BL1-04/C.
This module shows the step-by-step assembly of the parallel drive set 6 60 SE 60.
This module will lead you step by step through the assembly process of the linear unit GSF 6 60 TR 12x3.
The connection on the motor side must be individually adapted to the motor to be selected. For this purpose, the corresponding components must be machined.
This module shows the step-by-step assembly of the linear unit LRE 8 D14 80x40 ZU 40 R25.
This module shows the step-by-step assembly of the linear unit KLE 6 60x60 LR and KLE 8 80x80 LR.
This module shows the step-by-step assembly of the linear unit LRE 8 D14 80x40 ZS.
This module shows the step-by-step assembly of the linear unit KRF 8 80x40.
This module shows the step-by-step assembly of the linear unit LRE 8 D14 80x80 KGT 20x5.
This module shows the step-by-step assembly of the linear unit GSF 8 40 R10.
Conveying Technology
The item Railing System 8 D8 gives you the design freedom you need to safely guide goods of all kinds in any situation.
This module shows the step-by-step assembly of the belt conveyor 8 40 D.
This module will lead you step-by-step through the assembly process of the Timing Belt Conveyor 8 40 D.
This module shows the step-by-step assembly of the double belt conveyor 8 40 D.
This module will lead you step-by-step through the assembly process of the double timing belt conveyor 8 40 D.
Lean Production Building Kit System
The Release Unit D30 H8 is the ideal partner for front shooters for all item roller conveyor types.
With the Suspended Conveyor System, components that take up a lot of space in a KLT-carrier can be transported in a suspended position.
This module shows step-by-step instructions for building a chain-synchronised carriage in the Karakuri/LCA field.
You want to get to know the absolute basic elements of the LPS and their application? Then take a look at this module.
Build a practical beverage shelf.
The bearing block serves as a precise and smooth-running pivot bearing for larger and heavier frame parts. Supplemented by up to three rotary dampers, the bearing block provides a controlled and safe rotary movement.
You want to know how to realise a door solution with the Hinge D30-85 FP? Then you have come to the right place!
MB Building Kit System
The hinges Al light are suitable for swing doors and flaps in profile construction or made from panel elements.
Modular system for aluminium hinges with high load capacity, suitable for heavy doors, flaps and pivoting...
The Magnetic Catches are preferably suitable for locking swing and sliding doors.
With the Lifting-door system, lifting doors up to a width of 2m and a total weight of 35kg can be realised.
With the ball joints, you freely align profiles and accessories in two dimensions.
Telescope 8 40x40 is suitable for struts with adjustable length for height or inclination adjustments of operating equipment.
Telescope 8 80x40 is a heavy-duty strut of adjustable length. It is particularly suitable for adjusting the height or inclination of equipment.
The T-Slot Slider 8 80x40 uses the t-slot groove 8 to guide a robust slide element with plain bearings.
A spindle adjustment for feeders, measuring assemblies, limit switches and fixtures.
For the construction of sliding doors made of frameless panel elements that are guided in the t-slot groove with sliding pieces.
Smooth-running and stable sliding door elements for safety guards.
Here we show you the most important steps for assembling panels using item Multiblocks.
The item Access Door system is based on components that have been carefully coordinated to produce highly functional door solutions.
The Universal Holder 8 K is a three-part system for covered cable routing along the groove.
The roller shutter system is designed for the installation of manually operated roller shutters, for example, for closing cabinet systems, control panel...
anel-Clamping Strips are ideal for retrofitting panel elements (primarily made of Acrylic Glass, PET-G or Polycarbonate) into an assembled profile frame.
Particularly easy-to-use connecting element for two parallel profiles of Line 8.
The edging strip 8 K is used to retrofit panel elements into a closed profile frame.
The infinitely adjustable feet are suitable for structures of all kinds. A ball and socket joint compensates for slopes.
The apparatus castors are available in several sizes as swivel castor, swivel castor with double locking device (brake for wheel...
Perfect for doors: If panel elements are to be fixed in the profile grooves, the corners do not have to be notched with the central-fastening set.
Stable fastening plates for accommodating Adjustable Feet, Castors and other elements.
The angle sets 8 serve as a non-positive connection of profiles without the need for machining.
Universal, friction-locked connection of all profiles of a series with the possibility of subsequent displacement, as the...
Universal, non-positive connection of all profiles of a series with the possibility of subsequent displacement, as the profiles can be...
Mitre-Fastening Sets are suitable for connecting two profiles at an angle.
The item Standard-Fastening Set connects two profiles at right angles with high strength. Its connecting plate is used for optimum force transmission and ensures correct positioning and torsion-resistant fixing.
To enable panel elements to be fixed in the groove without an additional recess in the area of the connecting elements, the standard connecting set 8 K is particularly compact.
The Automatic-Fastening Set 8 NO is suitable for closed grooves.
With the Diagonal Brace Set 8 300x30 you increase the load capacity of horizontally running profiles in an elegant and simple way.
The hinge connects profiles at any angle up to 180°. Removing the spacer rings creates a rigid angle element.
Clamp-Profile Fastening Set 8 32x18 ensures a correctly positioned corner connection for the profiles.
With the connection set 8 40x40-45° it is possible to connect two or three profiles at 90°.
Additional support for loaded profiles: With the item Pinning Element, you can additionally secure a non-positive connection with a positive fit.
Stand Foot Set 8 St 160x160 combines optimum protection with a compact design and is ideal for use with freestanding enclosures and guards.
item Adhesive Multiblocks are the solution for quick, easy and flush fixing of surfaces in profile frames.
Additional protection for sensitive areas! With the barrier tape you limit the
access and avoid carelessly entering work areas.
Sealing profiles fasten panel elements of different thickness in the profile groove 5, 6, 8 or 12. The permanently elastic strips of TPE seal the groove edges and make cleaning easier because neither moisture nor dust can collect in the groove.
With the modular conduit system, individual conduits for cables and hoses can be constructed.
Fasteners for fixing a profile at an angle of 45° when constructing joints and trusses.
Bed Plate Profiles 8 for producing areas of any size with groove 8 and modular dimension 40 mm.
The Automatic Butt-Fastening Sets can be used to connect the end faces of two profiles from the same Line without mechanical processing.
The Universal-Butt-Fastening Sets can be used to connect the end faces of two profiles from the same Line.
Face Fastening Set 8 is used to create a rigid angled connection between two profiles whose grooved sides face each other.
Smart Products
This module shows the installation of the LED strip RGB 24V with accessories.
Der Multi-Segment RGB LED-Streifen ist ein flexibles, durch IO-Link ansteuerbares, LED-Band.